REFERENCES
Noise-proofing floor with barrier, Bratislava
- The compressors in the two condensing units negatively affected the atrium spaces
- The implementation of a raised absorbing floor and a noise-proofing glass wall to reduce noise in the atrium of the building was added to the previously implemented silencers
- Hot-dip galvanized steel supporting structure with a long service life
- The construction is flexibly placed on sylomer pads under the spreader fee
- AkuSystem P-53 panels were used in the implementation
- Waterproofing layer was made on the raised absorbing floor to extend the service life
„ Combination of raised absorbing floor and noise-proofing glass wall, the atrium once again became a place for relaxation, meetings, and social events. “
Noise-proofing barrier on the roof of the shopping center, Bratislava
- The outdoor AC units generated noise and the highest permissible values were exceeded on the facades of the surrounding residential buildings
- The noise-proofing barrier was designed without anchoring to the ceiling structure with load-bearing concrete blocks on the footings
- Express implementation of the noise-proofing barrier within 3 weeks from the client order
- AkuSystem P-53 panels with a zinc surface were used in the implementation
- Final noise measurements confirmed requested effectiveness of the noise-proofing barrier
„ Project documentation, production, assembly and handover within 3 weeks of ordering by the client. “
Noise-proofing barrier Bratislava technical room
- Noise from technical room bothered residents of nearby apartment house
- By undertaking noise measurements and acoustic simulations noise-proofing barrier was designed
- Building department planning approval for the announcement of the construction was part of the realization
- Manufacturing and assembly of the barrier measuring 11,0 x 4,7 m (l x h)
- Final noise measurements confirmed sufficient protection of noise- proofing barrier for the residents
„ Acoustic design, project, installation and successful handover within 6 weeks form first contact with the client “
Noise-proofing barrier Bratislava shopping mall
- Noise assessment for building approval showed the noise exceeding at the nearest residential building and the implementation of a noise barrier was ordered
- Project architect designed steel framework
- Therefore, building company ordered noise- proofing panels line P-53
- Noise-proofing barrier was assembled on a custom steel framework with 42 pieces of AkuSystem P-53 panels with size 12,0 x 2,2 m (l x h)
- Final noise measurements confirmed requested effectiveness of the noise-proofing barrier
„ Standardized Akusystem P-53 panels were delivered within two weeks from receiving the order “
Noise-proofing enclosure for printer device
- Printer operators were exposed to excessive noise levels
- Sound insulation of noise-proofing enclosure was designed using acoustic simulations in 3D software
- Realisation project of the enclosure counted with all requests of the customer for variability of the printer line
- P-80 panels were chosen for manufacturing of the enclosure
- Three security guillotine doors with electrical engine were part of the enclosure
„ Because of the noise-proofing enclosure, operators of the printer were reclassified to second work category for health protection against noise “
Noise-proofing of pressing lines L1 and L3, Nitra
- During the design of the pressing hall, high requirements on noise reduction of pressing lines were requested to protect operators’ hearing
- Noise reduction project resulted in complex solution to muffle the pressing lines
- Designed enclosures sizes were 65 x 17 x 10 m (l x w x h)
- Sound insulation of noise- proofing enclosure was projected with acoustic simulations in 3D software
- P-53 and P-100 panels were chosen for manufacturing of the enclosure
- 14 security guillotine doors, 12 two – winged doors and 13 one – winged doors were part of every enclosure
„ Approval measurements confirmed fulfilment of limit noise values and allowed launching pressing lines operation “
Noise-proofing barrier with floor Boleráz
- Excessive noise form air-conditioning unites had negative impact on nearest residential objects and industrial site too
- Noise-proofing barrier was designed with acoustic simulations in 3D software
- Beside barrier, acoustic floor under the technology was designed for higher effectiveness
- AkuSystem panels P-80 and R-50 were implemented
„ Noise measurements in environment near family houses confirmed successful noise-proofing of air-conditioning unites “
Silencers for condensing unit, Bratislava
- 32 ventilators for two condensing unites negatively affected near residential buildings
- From several solution in noise assessment, silencers were chosen
- Realisation project considered need of low weight solution, therefore AkuSystem with lightweight framework and custom silencers was chosen
- Assembly was provided with 35 m crane and lasted whole day
- Approval noise measurements confirmed sufficient protection of silencers for near residents from noise
„ Project documentation, manufacturing, assembly and successful delivery within 8 weeks from the order “
PRODUCTS
REFERENCES
Noise-proofing floor with barrier, Bratislava
„ Combination of raised absorbing floor and noise-proofing glass wall, the atrium once again became a place for relaxation, meetings, and social events. “
More info & gallery
- The compressors in the two condensing units negatively affected the atrium spaces
- The implementation of a raised absorbing floor and a noise-proofing glass wall to reduce noise in the atrium of the building was added to the previously implemented silencers
- Hot-dip galvanized steel supporting structure with a long service life
- The construction is flexibly placed on sylomer pads under the spreader fee
- AkuSystem P-53 panels were used in the implementation
- Waterproofing layer was made on the raised absorbing floor to extend the service life
Open gallery
Noise-proofing barrier on the roof of the shopping center, Bratislava
„ Project documentation, production, assembly and handover within 3 weeks of ordering by the client. “
More info & gallery
- The outdoor AC units generated noise and the highest permissible values were exceeded on the facades of the surrounding residential buildings
- The noise-proofing barrier was designed without anchoring to the ceiling structure with load-bearing concrete blocks on the footings
- Express implementation of the noise-proofing barrier within 3 weeks from the client order
- AkuSystem P-53 panels with a zinc surface were used in the implementation
- Final noise measurements confirmed requested effectiveness of the noise-proofing barrier
Open gallery
Noise-proofing barrier Bratislava technical room
„ Acoustic design, project, installation and successful handover within 6 weeks form first contact with the client “
More info & gallery
- Noise from technical room bothered residents of nearby apartment house
- By undertaking noise measurements and acoustic simulations noise-proofing barrier was designed
- Building department planning approval for the announcement of the construction was part of the realization
- Manufacturing and assembly of the barrier measuring 11,0 x 4,7 m (l x h)
- Final noise measurements confirmed sufficient protection of noise- proofing barrier for the residents
Open gallery
Noise-proofing barrier Bratislava shopping mall
„ Standardized Akusystem P-53 panels were delivered within two weeks from receiving the order “
More info & gallery
- Noise assessment for building approval showed the noise exceeding at the nearest residential building and the implementation of a noise barrier was ordered
- Project architect designed steel framework
- Therefore, building company ordered noise- proofing panels line P-53
- Noise-proofing barrier was assembled on a custom steel framework with 42 pieces of AkuSystem P-53 panels with size 12,0 x 2,2 m (l x h)
- Final noise measurements confirmed requested effectiveness of the noise-proofing barrier
Open gallery
Noise-proofing enclosure for printer device
„ Because of the noise-proofing enclosure, operators of the printer were reclassified to second work category for health protection against noise “
More info & gallery
- Printer operators were exposed to excessive noise levels
- Sound insulation of noise-proofing enclosure was designed using acoustic simulations in 3D software
- Realisation project of the enclosure counted with all requests of the customer for variability of the printer line
- P-80 panels were chosen for manufacturing of the enclosure
- Three security guillotine doors with electrical engine were part of the enclosure
Open gallery
Noise-proofing of pressing lines L1 and L3, Nitra
„ Approval measurements confirmed fulfilment of limit noise values and allowed launching pressing lines operation “
More info & gallery
- During the design of the pressing hall, high requirements on noise reduction of pressing lines were requested to protect operators’ hearing
- Noise reduction project resulted in complex solution to muffle the pressing lines
- Designed enclosures sizes were 65 x 17 x 10 m (l x w x h)
- Sound insulation of noise- proofing enclosure was projected with acoustic simulations in 3D software
- P-53 and P-100 panels were chosen for manufacturing of the enclosure
- 14 security guillotine doors, 12 two – winged doors and 13 one – winged doors were part of every enclosure
Open gallery
Noise-proofing barrier with floor Boleráz
„ Noise measurements in environment near family houses confirmed successful noise-proofing of air-conditioning unites “
More info & gallery
- Excessive noise form air-conditioning unites had negative impact on nearest residential objects and industrial site too
- Noise-proofing barrier was designed with acoustic simulations in 3D software
- Beside barrier, acoustic floor under the technology was designed for higher effectiveness
- AkuSystem panels P-80 and R-50 were implemented
Open gallery
Silencers for condensing unit, Bratislava
„ Project documentation, manufacturing, assembly and successful delivery within 8 weeks from the order “
More info & gallery
- 32 ventilators for two condensing unites negatively affected near residential buildings
- From several solution in noise assessment, silencers were chosen
- Realisation project considered need of low weight solution, therefore AkuSystem with lightweight framework and custom silencers was chosen
- Assembly was provided with 35 m crane and lasted whole day
- Approval noise measurements confirmed sufficient protection of silencers for near residents from noise
Open gallery
PRODUCTS
Contact Us!